It is very easy to use interface templates to add configurations to interfaces but how to configure template to remove configurations from an interface.
For example, consider an interface that has been configured by default with a service policy. I would like to apply a template to remove that service policy based on ISE action for example. How is supposed the template to be configured to include a "no service-policy ... in" command ?
thanks for the info. Actually the idea is not to set back the interface to default but only to remove one command line by having a template with only the "no form" of the service-policy command that is configured on the interface.
Hello everybody,I am newbies with setting cisco switch.I downloaded Catalyst 2960-X Switch Getting Started Guide but I can't access to Device Manager - Express Setup according to guide.If you follow the instructions and try to keep all LEDs (exc...
To participate in this event, please use the button to ask your questions
* Note: The link to join the discussion will be activated on March 8
All the knowledge of these four experts at your disposal!
Cisco Software-Defined Wide Area Network (SD-WAN...
Community Live- ISR1100X-4G and ISR1100X-6G Platform Overview and Architecture
(Live event - Tuesday, 23 March, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event will have place on Tuesday 23rd, March 2021 at 10:00 hrs PDT&...
Cisco Secure Network Access is helping IT to bridge the gap between what is essential to the business and what the network delivers and to build the next-generation campus network for an unplugged and uninterrupted experience.
Learn more about how these w...
(view in My Videos)
Community Live- New Additions to the Catalyst 8000 Family
(Live event - Tuesday, 23 February, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event had place on Tuesday 23rd, February 2021 at 10:00 hrs PDT...