08-06-2014 11:19 AM - edited 03-07-2019 08:18 PM
Hello,
Can I put IOS 15.0 on a regular 3560. I don't have an X/G/V2/E 3560. I have a WS-C3560-24TS-S. It has the required RAM and Flash but whenever I look at the documentation for IOS 15.0 is says it only supports WS-C3560-24TS-E, and I can't find an IOS 15.0 download when I search for code pertaining to the 3560-24TS-S. Any insight on this would be helpful!
Thanks,
~Mike
Solved! Go to Solution.
08-06-2014 01:48 PM
Hi,
There is no 15.x release for the WS-C3560-24TS-S, therefore you will not be able to install any of the 15 codes. This model is also end of life. The latest available code is 12.2.55-SE9 which is the recommended version on CCO.
Hope this helps.
08-06-2014 01:48 PM
Hi,
There is no 15.x release for the WS-C3560-24TS-S, therefore you will not be able to install any of the 15 codes. This model is also end of life. The latest available code is 12.2.55-SE9 which is the recommended version on CCO.
Hope this helps.
08-06-2014 04:37 PM
Leo,
Thanks for the quick and direct response. The reason I bring this up is because I am in need of 4 switches that will run 15.x IOS. Do you happen to know which switch model will be able to accomplish this while being fairly cheap (used on ebay or something).
Thanks again!
~Mike
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide