The reason for this behavior is that "verify" command without /md5 parameter is not supported on 2960.
The initial implementation of the 'verify' command worked by running a checksum against the IOS image and comparing it with a flash checksum stored within the image.
This ability was only supported on certain platforms, and has never been supported for the desktop series switches (3750/3560/3550/2960/etc). The 'verify' command was later broadened to support additional devices which did not contain the flash checksum within the IOS image. This was accomplished by adding the /MD5 option to compute an MD5 checksum hash of the image stored in flash. On platforms supporting the 'verify' command, the MD5 hash would also be compared with one inside the IOS image.
While it possible to run the command on these switches, the output was not reliable due to the fact that the desktop switches didn't an internal checksum within the image itself. Therefore, for reliable verification, you should use /md5 parameter and compare the resulting checksum with the one you see on CCO for your image.
GoalDocumentationDefineAdd Device to Smart AccountSync Smart Account via vManage1.1 VNF package for vBranchDesignDeployOperate
To successfully provision a ENCS device in remote site with internet connection.
Minimum software relea...
はじめに確認方法Version による Application name の変更について備考参考情報 はじめに本ドキュメントでは Cisco SD-WAN における Policy 上で設定可能な Application を確認する方法について記載しています。 確認方法サポートされている Application name についてはご使用されている vManage へ API を呼び出して確認することが可能です。https://<IP or FQDN>/...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where the spok...
On 24th August 2021, Cisco announced the latest IOS XE release - Cisco IOS XE Bengaluru 17.6.1a
IOS XE 17.6.1a unlocks various routing features and enhancements comprehensively covering different technology segments such as voice, security,...
DMVPN (Dynamic Multipoint VPN) Introduced by Cisco in late 2000 is a routing technology you can use to build a VPN network with multiple sites (spokes) without having to statically configure all devices. It’s a “hub and spoke” network, where th...