06-30-2017 09:07 AM - edited 03-08-2019 11:09 AM
Dears,
I have plenty of access switches 3850 IOS XE connected to core N7k directly. i have enabled ip dhcp snooping on the switch and also the arp inspection, My DHCP server is temporarily on one of the access switch later we will move to the windows dhcp server.
i want to add static ip address to the printers on multiple floors on the access switches and they are getting blocked due to dynamic arp inspection,
how i can achieve the above
thanks
Solved! Go to Solution.
07-02-2017 12:02 AM
Hello,
try and configure a manual binding using the command:
ip dhcp snooping binding mac-addr vlan vlan ipaddr interface ifname expiry lease-in-seconds
07-02-2017 12:02 AM
Hello,
try and configure a manual binding using the command:
ip dhcp snooping binding mac-addr vlan vlan ipaddr interface ifname expiry lease-in-seconds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide