Hi,
I'm trying to configure IP SLA with a track for modify routing table in our cisco SG350X.
I don't find this feature using cli:
CISCO(config)#ip ?
access-list This command creates an ACL, which perform
classification on layer 3 fields and enters ip-access
configuration mode.
arp ARP configuration commands
default-gateway Specify default gateway
dhcp IP DHCP client commands
domain IP Domain Naming System
helper-address Specify a destination address for UDP broadcasts
host To define static host name-to-address mapping in the
host cache
http Specify the HTTP server configuration
https HTTPS server configuration
igmp IGMP interface commands
igmp-proxy IGMP proxy configurations
multicast-routing To enable IP multicast routing
name-server To set the available name servers, use the ip
name-server global configuration command.
route Establish static routes
routing Enable IP routing
source-guard IP source-guard configuration
ssh Global Secure Shell protocol configuration subcommands
ssh-client secure shell client.
telnet Telnet server configuration
Someone know if IP SLA is able to use with this switch?
Thanks in advance,
Lluís P.
