IP Verify Source Command Issue

[Md.Mosharof Hossain]

Hi,

We have configured IP source guard in LAN switch (WS-C2960-48PST-S) and working fine with IOS version c2960-lanlitek9-mz.122-50.SE2.bin. Recently we have purchased same switch with upreared IOS c2960-lanlitek9-mz.122-55.SE7.bin but "ip verify source" command is absence in specific interface. Please let us know which upgrade IOS version we can use to execute the mentioned command.

Thanks in advance.

[Seb Rupik]

Hi there,

According to:

http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp

For the 2960-lanlite the versions of software with the feature are 15.0(1) and 15.0(2) .

cheers,

Seb.

[Md.Mosharof Hossain]

Hi Seb Rupik,

Please find the below output and here is IP verify source command absence.

Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 52    WS-C2960+48PST-S   15.0(2)SE6            C2960-LANLITEK9-M

Configuration register is 0xF

Backup-3(config-if)#int fa 0/3
Backup-3(config-if)#ip ver?
% Unrecognized command
Backup-3(config-if)#ip ?
Interface IP configuration subcommands:
  access-group  Specify access control for packets
  admission     Apply Network Admission Control
  auth-proxy    Apply authenticaton proxy
  device        IP device tracking
  dhcp          Configure DHCP parameters for this interface
  igmp          IGMP interface commands

[Seb Rupik]

Is it possible to try the LAN Base version, as this will certainly have the feature.

If you have a smartnet contract you could query with Cisco why the feature is listed but not present.

cheers,

Seb.