cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
1118
Views
0
Helpful
7
Replies
Highlighted
Enthusiast

ISR 4331 missing comands

Hello,

 

New to the ISR 4400s and I'm finding that there are some commands that seem to be missing.. I'm trying to do very simple things like prevent snmp,ssh, etc.. to any IP other than the management interface (G0).. 

I've tried using MPP - the "control-plane host" command is missing. 

I've tried using ACL/Class Map/Policy Map/ Service-Policy -  the "drop" command is missing from the Policy Map ... 

Is there something I've not done? This routers are right out the box and have the  version of code isr4400-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin... 

Thanks for any help..

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

id say its in the sec license but the feature navigator link i provided should show you exactly you can pick the software and license version and see what features are available for that platform/software

View solution in original post

7 REPLIES 7
Highlighted
VIP Mentor

MPP should be in that code i use it , what does it show you when you check the help ?
i have 155.3 in flash but moved up slightly recently

 


XXX(config)#control-plane host
XXX(config-cp-host)#?
Control Plane host configuration commands:
exit Exit from control-plane host configuration mode
management-interface Configure interface for receiving network management traffic
no Negate or set default values of a command

XXX(config-cp-host)#do sh ver | i 15
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S5a, RELEASE SOFTWARE (fc3)
System image file is "bootflash:isr4300-universalk9.03.16.05a.S.155-3.S5a-ext.SPA.bin"
XXX(config-cp-host)#


Highlighted

That's what's so crazy... I'm only seeing :

nR-IR-02(config-cp)#?
Control Plane configuration commands:
exit Exit from control-plane configuration mode
no Negate or set default values of a command
service-policy Configure QOS Service Policy

 

nR-IR-02(config-cp)#do sh ver | i 15
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S4b, RELEASE SOFTWARE (fc1)
System image file is "bootflash:isr4400-universalk9.03.16.04b.S.155-3.S4b-ext.SPA.bin"

Highlighted

hmm what license you got running i got appxk9, securityk9,ipbasek9 and voice but it wouldnt be in the uck

 

feature navigator

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/index.jsp

Highlighted

Cisco just checked and it looks like just the base license... one would think that the control plane configuration would be on that seeing as how it's to secure the router... I'm gonna have to do a little research with the customer to see what the deal is.. 

Highlighted

id say its in the sec license but the feature navigator link i provided should show you exactly you can pick the software and license version and see what features are available for that platform/software

View solution in original post

Highlighted

I'm pretty much in agreement here...  I'm looking at the security license... It's crazy to me that "securing" the actual control plane would require a different license nowadays... 

 

Highlighted
Enthusiast

I've got Cisco TAC verifying that supposedly as we speak.... 

Content for Community-Ad