Hi, I have problems to do an IOS upgrate of N5K-C5548UP, i have the next error:
switch(config)# install all kickstart bootflash:n5000-uk9-kickstart.5.1.3.N2.1b.bin
Verifying image bootflash:/n5000-uk9-kickstart.5.1.3.N2.1b.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/n5000-uk9.5.1.3.N1.1a.bin for boot variable "system".
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/n5000-uk9.5.1.3.N1.1a.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/n5000-uk9-kickstart.5.1.3.N2.1b.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/n5000-uk9.5.1.3.N1.1a.bin.
[####################] 100% -- SUCCESS
Recommended action::
"Module 1 might not be supported in the new image,
it should be powered off before proceeding with install".
Performing module support checks.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 no n/a n/a Incompatible image
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------- ---------------------- ---------------------- ------------
1 system 5.1(3)N1(1a) 5.1(3)N1(1a) no
1 kickstart 5.1(3)N1(1a) 5.1(3)N2(1b) no
1 bios v3.5.0(02/03/2011) v3.5.0(02/03/2011) no
1 SFP-uC v1.0.0.0 v1.0.0.0 no
1 power-seq v1.0 v1.0 no
3 power-seq v5.0 v5.0 no
1 uC v1.2.0.1 v1.2.0.1 no
switch(config)#
switch(config)#
switch(config)# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 3.5.0
loader: version N/A
kickstart: version 5.1(3)N1(1a)
system: version 5.1(3)N1(1a)
power-seq: Module 1: version v1.0
Module 3: version v5.0
uC: version v1.2.0.1
SFP uC: Module 1: v1.0.0.0
BIOS compile time: 02/03/2011
kickstart image file is: bootflash:///n5000-uk9-kickstart.5.1.3.N1.1a.bin
kickstart compile time: 2/7/2012 23:00:00 [02/08/2012 07:49:30]
system image file is: bootflash:///n5000-uk9.5.1.3.N1.1a.bin
system compile time: 2/7/2012 23:00:00 [02/08/2012 12:44:33]
Hardware
cisco Nexus5548 Chassis ("O2 32X10GE/Modular Universal Platform Supervisor")
Intel(R) Xeon(R) CPU with 8263880 kB of memory.
Processor Board ID FOC16430F1H
Device name: switch
bootflash: 2007040 kB
Kernel uptime is 0 day(s), 1 hour(s), 23 minute(s), 15 second(s)
Last reset
Reason: Unknown
System version: 5.1(3)N1(1a)
Service:
plugin
Core Plugin, Ethernet Plugin
switch(config)#
switch(config)# poweroff module ?
<2-4> Please enter module number switch(config)# poweroff module ?
<2-4> Please enter module number
Can you tell me how can I upgrade this device?
Best regards.
