I find example how to configure and verify a Layer 2 VNI with back-to-back ingress replication for Cisco IOS XE 17.6.x (cat 9300). https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-6/configuration_guide/vxlan/b_176_bgp_evpn_vxlan_9300_cg/configuring_evpn_vxlan_layer_2_overlay_network.html#Cisco_Reference.dita_f6d30772-bf28-4687-adc0-7907dc3ed60d...
I try to build similar scheme on cat8300. (ios xe 17.6.3), but i can not do this.
when i configure encapsulation in "l2vpn evpn instance" i can choose only mpls. No VxLAN.
R1(config)#l2vpn evpn instance 100 vlan-based
R1(config-evpn-evi)#encapsulation ?
mpls Encap type mpls
when i try add VNI member to NVE
R1(config)interface nve1
R1(config-if)#source-interface Loopback1
R1(config-if)#host-reachability protocol bgp
R1(config-if)#member vni 5100 ingress-replication
% Can't configure L2DP VNIs on NVE interface with CP or CP VNI configured - i see this error.
I can not find information, is it possible to configure this equipment according to this scheme or not?
