02-01-2010 07:05 AM - edited 03-06-2019 09:31 AM
Hi,
I wanna install a license file (.lic) in a Nexus 7000
I'm reading the Nexus 7000 License Configuration Guide and in that document I read that you need to access the console (Active
Supervisor Module) before you use the install license command..
My question is, can I execute the same command (install license) via SSH or Telnet ??
Thanks in Advanced
My Best Regards,
Solved! Go to Solution.
02-01-2010 07:25 AM
Hi lomonaco
I think you should be, but never tried before .. This document says you need to install it thro console :
but with other devices like routers, we have the "license install" command which we do it remote.. so, i think it must be the same here..
Does it give you an error when you configure this remote , thro telnet or SSH ?
Raj
02-01-2010 01:39 PM
Yes you can via telnet or SSH install license. As long as the license file is already uploaded to your flash card on your router.
02-01-2010 07:25 AM
Hi lomonaco
I think you should be, but never tried before .. This document says you need to install it thro console :
but with other devices like routers, we have the "license install" command which we do it remote.. so, i think it must be the same here..
Does it give you an error when you configure this remote , thro telnet or SSH ?
Raj
02-01-2010 01:39 PM
Yes you can via telnet or SSH install license. As long as the license file is already uploaded to your flash card on your router.
03-05-2010 07:01 AM
Thanks Raj and Lucien for you help...
Works as expected
My Best Regards,
Andre Lomonaco
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide