License Mismatch

[billybong]

Hi All, would anyone know if i can mix WS-C3650-24TS-E with WS-C3650-24TS-S in a stack

the issue i have is a license mismatch

    Switch#sh sw detail
    Switch/Stack Mac Address : 5087.89bd.7280 - Local Mac Address
    Mac persistency wait time: Indefinite
                                                 H/W   Current
    Switch#   Role    Mac Address     Priority Version  State
    ------------------------------------------------------------
    *1       Active   5087.89bd.7280     1      A0      Ready
    2       Member   f40f.1bf0.d780     1      0       Lic-Mismatch

Thanks In Advance

[Charles Hill · Accepted solution]

The issue I see is not with the stack member being a different 3650#, but a license issue.  Stacking the two 3650s should work fine.

Q. How is a “license mismatch error” fixed in a Cisco Catalyst 3650 stack?

A. The license level of the mismatched stack member switch can be changed with the licenseright-to-use activate <license> all acceptEULA CLI command (entire stack should have the same wired license level) and reloaded from the active switch console. This will enable the member switch to join the stack successfully. The customer has to purchase a license before moving to a specific license level.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/qa_c67-729531.html

Hope this helps,

Please rate helpful posts.

Thanks.

[billybong]

Thanks Charles :)