Hi,
I have two switch and 1 portchannel created, this portchannel have associated two interfaces. I need to balance the traffic between the two interfaces.
The configuration is:
Switch 4507R
interface GigabitEthernet3/48 (electrical)
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode desirable
interface GigabitEthernet5/6 (optical)
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode desirable
Switch 3750G
interface GigabitEthernet1/0/2(Electrical)
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode desirable
interface GigabitEthernet1/0/25 (optical)
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 4 mode desirable
Operation Mode:
4507R
EtherChannel Load-Balancing Operational State (dst-mac)
3750G
EtherChannel Load-Balancing Operational State (src-mac)
that option is not balancing, What can I make about this ?
Sorry but my english is no good.
Regards.