cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3645
Views
0
Helpful
1
Replies

(*) - local vPC is down, forwarding via vPC peer-link

prem.ce24
Level 1
Level 1

Hello 

Local VPC status down what is the issue-----

status - 

 

 show vpc
Legend:
                (*) - local vPC is down, forwarding via vPC peer-link

vPC domain id                     : 1
Peer status                       : peer adjacency formed ok
vPC keep-alive status             : peer is alive
Configuration consistency status  : success
Per-vlan consistency status       : success
Type-2 consistency status         : success
vPC role                          : secondary
Number of vPCs configured         : 2
Peer Gateway                      : Disabled
Dual-active excluded VLANs        : -
Graceful Consistency Check        : Enabled
Auto-recovery status              : Enabled (timeout = 240 seconds)

vPC Peer-link status
---------------------------------------------------------------------
id   Port   Status Active vlans
--   ----   ------ --------------------------------------------------
1    Po1    up     1,150

vPC status
----------------------------------------------------------------------------
id     Port        Status Consistency Reason                     Active vlans
------ ----------- ------ ----------- -------------------------- -----------
10     Po10        down*  success     success                    -
20     Po20        down*  success     success                    -

 

 

# show port-channel summary
Flags:  D - Down        P - Up in port-channel (members)
        I - Individual  H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
        M - Not in use. Min-links not met
--------------------------------------------------------------------------------
Group Port-       Type     Protocol  Member Ports
      Channel
--------------------------------------------------------------------------------
1     Po1(SU)     Eth      LACP      Eth1/1(P)    Eth1/2(P)
10    Po10(SD)    Eth      LACP      Eth1/47(I)
20    Po20(SD)    Eth      LACP      Eth1/48(I)
#

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

What is Portchannel 10 and 20 for?  They are both down.

Can you post the config from both switches?

HTH

Review Cisco Networking for a $25 gift card