06-19-2017 11:57 AM - edited 03-08-2019 11:01 AM
Hi all,
I have a 3560G running IOS 12.2(35)SE5 and I'm thinking that a certain logging command is not supported. I was hoping someone could confirm.
For example, I want to change the port to send Syslogs.
In the CLI, I can type "Logging host x.x.x.x" but I want to add "transport udp port 5141 session-id hostname" However, this syntax after the IP address is not recognized.
Is this just an issue with the IOS version or am I missing something?
Any help is much appreciated!
Solved! Go to Solution.
06-19-2017 12:29 PM
Hi,
I know the 3850 series do support it,but not sure if this platform support "Logging host x.x.x.x transport udp port 5141 session-id hostname" command.
Here are all the reference guides for newer versions, but I don't see the command being supported.
http://www.cisco.com/c/en/us/support/switches/catalyst-3560-series-switches/products-command-reference-list.html
HTH
06-19-2017 12:29 PM
Hi,
I know the 3850 series do support it,but not sure if this platform support "Logging host x.x.x.x transport udp port 5141 session-id hostname" command.
Here are all the reference guides for newer versions, but I don't see the command being supported.
http://www.cisco.com/c/en/us/support/switches/catalyst-3560-series-switches/products-command-reference-list.html
HTH
06-22-2017 01:59 PM
Upgrading the CISCO IOS to 12.2(55) SE10 resolved the issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide