logging event link-status global

[Ibrahim Jamil]

Hi Netpro

why the IOS on 4500 doesn't support globaly the below command, although am running the IOS 12.2

logging event link-status global

thanks

[Pronoy Dasgupta]

Hey Ibrahim,

Could you give me the exact IOS version that is being used on the 4500?

HTH

Pronoy

[Ibrahim Jamil]

Hi Prony

cat 4000-I5K91S-M VERSION 12.2 EWA

thnaks

[Pronoy Dasgupta]

Ibrahim,

The support for this command was introduced in 12.2(25)SG. Here is a brief synopsis from the command reference:

logging event link-status global (global configuration)

To change the default switch-wide global link-status event messaging settings, use the
logging event link-status global command. Use the no form of this command to disable the link-status event messaging.

logging event link-status global

no logging event link-status global

Syntax Description

This command has no arguments or keywords.

Defaults

The global link-status messaging is disabled.

Command Modes

Global configuration

Command History

Release	Modification
12.2(25)SG	Support for this command was introduced on the Catalyst 4500 series switch.

HTH

Pronoy