ā08-18-2010 12:10 PM - edited ā03-06-2019 12:32 PM
Using Layer3 switch C3750 12.2(53) IOS I can dynamically assign IP configs to MS XP laptops with the DHCP service but I cannot statically assign host IP using the MAC address. I have tried both client-id (catenating using the 01 prefix) and by hardware ieee802 and the default Ethernet. with no success -looking for suggestions. Thanks
Should also mention on the client laptop user privileges are very restricted and network configurations cannot be changed so the router DHCP service must accommodate
Solved! Go to Solution.
ā08-18-2010 03:32 PM
Hi,
Manual DHCP binding should work fine with below config example.
ip dhcp pool Mars
host 172.16.2.254 mask 255.255.255.0
hardware-address 02c7.f800.0422 ieee802
client-name Mars
If you configured as same as above example and it is still not working, you can check why it is not working by "deb ip dhcp server packet" and "deb ip dhcp server event".
These two debug will tell you how 3750 received DHCP discover from PC and how it respond to it.
If you copy the output of above debug, I can review it.
Also, what IOS version are running on it?
KK.
ā08-18-2010 03:32 PM
Hi,
Manual DHCP binding should work fine with below config example.
ip dhcp pool Mars
host 172.16.2.254 mask 255.255.255.0
hardware-address 02c7.f800.0422 ieee802
client-name Mars
If you configured as same as above example and it is still not working, you can check why it is not working by "deb ip dhcp server packet" and "deb ip dhcp server event".
These two debug will tell you how 3750 received DHCP discover from PC and how it respond to it.
If you copy the output of above debug, I can review it.
Also, what IOS version are running on it?
KK.
ā08-19-2010 09:55 AM
Thank you Kim, including the client-name with the laptop's assigned name works
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide