10-31-2014 03:28 AM - edited 03-07-2019 09:19 PM
I have Cisco ME-3400 switch and i am not able to apply vtp commands please let me know if this switch supports vtp or not if yes then what is the command or procedure.
Thanks
Solved! Go to Solution.
10-31-2014 04:14 AM
Hello navaidmallick2009
Cisco ME-3400 switch does not support vtp protocol.
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3400/software/release/12-2_25_seg_seg1/configuration/guide/3400scg.pdf
Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services
10-31-2014 04:14 AM
Hello navaidmallick2009
Cisco ME-3400 switch does not support vtp protocol.
http://www.cisco.com/c/en/us/td/docs/switches/metro/me3400/software/release/12-2_25_seg_seg1/configuration/guide/3400scg.pdf
Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide