ME3400 temperature sensor

[Rolando Bega]

Hi there, we have 2 ME3400 switches both with me340x-metrobase-mz.122-46.SE IOS but:

ME3400 #1:

Switch#sh env all

FAN is OK

TEMPERATURE is OK

POWER is OK

ME3400 #2:

SWITCH>sh env all

FAN is OK

TEMPERATURE is OK

Temperature Value: 34 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 73 Degree Celsius

Red Threshold    : 83 Degree Celsius

POWER is OK

We need to monitor temperature using SNMP and the first one switch does'nt give the value, the second one does it (the OID is

1.3.6.1.4.1.9.9.13.1.3.1.3). Any idea?

Thanks in advance.

[Rolando Bega]

May be this is the right answer:

SWITCH#sh env all

FAN 1 is OK

FAN 2 is OK

TEMPERATURE is OK

Temperature Value: 40 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 56 Degree Celsius

Red Threshold    : 66 Degree Celsius

POWER SUPPLY 1 is OK

POWER SUPPLY 2 is OK

SWITCH#sh inventory raw | inc Temp

NAME: "Gi0/13 Module Temperature Sensor", DESCR: "GigabitEthernet0/13 Module Tem

perature Sensor"

--------------------------------------------------------------------------------------------------------------------------------------------------------------------

Switch#sh env all

FAN is OK

TEMPERATURE is OK

POWER is OK

Switch#sh inventory raw | inc Temp

Switch#NO RESULTS