06-16-2010 09:26 PM - edited 03-06-2019 11:36 AM
Hello,
Could some one let me know the real usuage of the below given command and how it works for a 6500 chasis
mls rate-limit all ttl-failure 2500 10
Cheers
Ajai
06-16-2010 10:06 PM
Hello,
Could some one let me know the real usuage of the below given command and how it works for a 6500 chasis
mls rate-limit all ttl-failure 2500 10
Cheers
Ajai
Hi Ajai,
Supervisor 720 module have hardware that can be used to limit how often the CPU will be interrupted by packets with expiring TTL. This example shows how to enable the hardware rate limiter and check its operation:
Router#mls rate-limit all ttl-failure 500 100
Router#show mls rate-limit
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
06-16-2010 10:13 PM
but will this command be of any use if there are packets that are hitting the 6500 with a ttl of 1 .I am trying to block the packets that hit the 6500 with a ttl of 1 ..
Ajai
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide