04-29-2012 04:32 AM - edited 03-07-2019 06:24 AM
We have Communication Media Module (WS-SVC-CMM) mounted on 6513 switch. It went down twice and we brought it up by applying "power enable module".
Could you please advise the reason of that?
04-29-2012 08:57 AM
Have upgraded the software lately?
If yes you may want to revert back to the old version, if not you may have a hardware failure
HTH
Sent from Cisco Technical Support iPhone App
04-30-2012 06:21 AM
Thanks Reza for the reply!
I actually haven't upgraded its software and I also suspect it's a hardware failure as it happened twice.
04-30-2012 03:23 PM
Can you please post the "sh logs"? I am interested to see the event logs of the time when the line card went offline.
05-01-2012 06:01 AM
unfortunately I haven't the logs at the failure time and this is the problem but we periodically monitor the core and we transfer all its logs to a syslog server.
I'll post the logs if it happens again.
Thanks a lot!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide