cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
556
Views
0
Helpful
1
Replies

moving folders

weichmann
Level 1
Level 1

Hello.

I hope i found help here. I have a cisco 3560 8 port switch. I really would lime to have the webinterface enabled. So i downloaded the archive from cisco. I extracted the archive to the flash of the switch. After rebooting the device everythings looks fine, but the html folder is a subfolder. It looks something like this: flash:c3560.../html

I my understanding to enable the webinterface the html folder should be here flash:html
How do i move the html folder from the subfolder to the root?
I googled but i didnt find anything. Any help is appriciated.

Thanks a lot in advance.
Cheers,
Thorsten

Sent from Cisco Technical Support iPhone App

1 Reply 1

joelgooding
Level 1
Level 1

Hello,

Did you resolve this? If not can you console into the switch and enter the commands:

ip http server

ip http secure-server

ip http authentication local

username xxxxx privilege 15 secret xxxxxx <-password

Give the switch an IP and you should be able to browse to the web interface. If you are still getting trouble after this, try using the IOS with web device manager from Cisco's site.

Joel

_______________________________
Please rate helpful posts and answered questions!

Joel _______________________________ Please rate helpful posts and answered questions!