Hi, I have Multilayer switch connected to two router. I already configure the IP address in router and VPCS. But when I'm tried to route the network, the routing doesn't work and when I check the routing table using command "show ip route" the routing isn't appear. I already try with static, rip, and ospf and still doesn't work.
Each interface already configure with "no switchport" to make the interface capable to route. Did I miss something? Please help me. Here the table routing and topology I used. thank you
| R1 | g0/0 | 192.168.100.2/24 |
| R2 | g0/0 | 192.168.200.2/24 |
| ESW1 | f1/0 | 192.168.100.1/24 |
| | f1/1 | 192.168.200.1/24 |
| | f1/2 | 192.168.3.1/24 |
| VPCS | e0 | 192.168.3.2/24 |
