cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
558
Views
0
Helpful
1
Replies

Multiple CPE's on LAN

penaChris
Level 1
Level 1

I have a wireless network bridge to wired lan and will need multiple wireless CPE devices off that LAN...I'm curious how to handle multiple 192.168.1.1 subnets throught the rest of the network.....

1 Reply 1

umedryk
Level 5
Level 5

Use the command show controllers lre cpe mfg to verify that the CPE Model Number string is correctly set for this CPE. Use the command hw-module slot lre upgrade remote to ensure that the CPE has the latest firmware. Use the interface configuration command shutdown followed by no shutdown to force the switch to re-fetch the CPE firmware version and checksum. As a last resort, power cycle the CPE.