NAT to allow multiple users access to another subnet

[kenneth-goh]

I need to use NAT on R1 to allow users from 192.168.26.0/24 access to 172.16.26.0/24.

Can NAT be done to translate users from 192.168.26.0/24 to 172.16.26.0/24 via R1 loopback interface ip 3.3.3.3 or any other alternative? Thanks in advance.

[kenneth-goh]

on R1 it's just static routes

ip route 172.16.26.0 255.255.255.0 1.1.1.2
ip route 192.168.26.0 255.255.255.0 2.2.2.1