need to update firmware c9300 48

[Biju KIV]

hi

I tried to upgrade via USB. the new firmware cat9k_iosxe.17.09.05.SPA.bin

the command i used is

switch# copy usbflash0:cat9k_iosxe.17.09.05.SPA.bin 

switch# source file: cat9k_iosxe.17.09.05.SPA.bin

switch #destination file: i gave the existing file of the switch. 

It didnt upgrade. screenshot for your reference

May I know the exact cli commands. I tried thru web browser. I am not able to login with default password ,.user webui. password cisco

I havent created any username password thru CLI commands

[Flavio Miranda]

@Biju KIV 

 Can you share the command "show version" ? The whole output please

[Leo Laohoo]

Please read the attachment and perform the upgrade in Install Mode.

[Biju KIV]

Hi

Couldn't able to switch on the switch. It's stuck

Please see attached

Regards
Biju

[Leo Laohoo]

If the switch is in ROMMON, post the entire output to the command "set".

[Biju KIV]

Hi the switch is not loading

Please see attached

[Biju KIV]

hi. its keep on showing this 

[marce1000]

                    >...hi. its keep on showing this 
   - Make sure current ROMMON version is compatible , check : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-9/release_notes/ol-17-9-9300/rommon_versions.html
                              Also have a look at : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvj29562

  M.