NMS fail to poll SNMP from Cisco C3560G version 12.2(25)SEB4

[wintelgroup1]

Hi all,

We h monitoring system solarwinds and op manager trying to poll snmp from Cisco Switch ( C3560 Version 12.2(25)SEB4). We already configured snmp-server host, Community String v2c and access list permit to both NMS server but unable to poll from NMS to Cisco Switch.

Besides both NMS SNMP configured in the switch, we also have other server configured polling SNMP to this switch. Totally SNMP-server host in the switch is 5. All hosts had permit in access list.

Is there any limit for snmp host connect to Cisco Switch?

Thanks

[Flavio Miranda]

Hello @wintelgroup1

Although this refers to traps managers, the same apply for any SNMP server as far as I know.

"A trap manager is a management station that receives and processes traps. Traps are system alerts that the switch generates when certain events occur. By default, no trap manager is defined, and no traps are sent. Switches running this Cisco IOS release can have an unlimited number of trap managers. "

 Enable SNMP debug on the switch and monitor solarwinds  activities:

debug cluster snmp

debug monitor snmp

debug platform snmp

-If I helped you somehow, please, rate it as useful.-

[wintelgroup1]

Hi Flavio,

We are not talking about traps. We already enable SNMP from Cisco Switch but not able to poll SNMP from NMS Server. Why ? Can you provide me more detail.

Thanks

[Flavio Miranda]

As I mentioned, cisco didn´t mention limitation on the amount of server for SNMP.

You can run debug command, as proposed. 

-If I helped you somehow, please, rate it as useful.-