Hola,
Tengo un switch Catalyst 3548, al mismo le configuré una Vlan de DATOS y otra para Voice Vlan.
Varias interfaces están asociadas a la Vlan2 (DATOS) y también a la Voice Vlan (Vlan101).
Cuando ejecuto el comando Show Vlan, no me muestra ninguna interfaz asociada a la Voice Vlan 101 (TOIP-ALCATEL), porqué?
-----------------------------------------
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1)
Building configuration...
Current configuration:
!
interface FastEthernet0/10
switchport access vlan 2
switchport voice vlan 101
spanning-tree portfast
no cdp enable
end
!
interface FastEthernet0/11
switchport access vlan 2
switchport voice vlan 101
spanning-tree portfast
no cdp enable
end
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi0/2
2 DATOS active Fa0/2, Fa0/3, Fa0/4, Fa0/5,
Fa0/6, Fa0/7, Fa0/8, Fa0/9,
Fa0/10, Fa0/11, Fa0/12, Fa0/13,
Fa0/14, Fa0/15, Fa0/16, Fa0/17,
Fa0/18, Fa0/19, Fa0/20, Fa0/21,
Fa0/22, Fa0/23, Fa0/24, Fa0/25,
Fa0/26, Fa0/27, Fa0/28, Fa0/29,
Fa0/30, Fa0/31, Fa0/32, Fa0/33,
Fa0/34, Fa0/35, Fa0/36, Fa0/37,
Fa0/38, Fa0/39, Fa0/40, Fa0/41,
Fa0/42, Fa0/43, Fa0/44, Fa0/45,
Fa0/46, Fa0/47, Fa0/48
101 VOIP-ALCATEL active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
-------------------------------
Gracias.
