NX-7000 : Configuring the default-gateway

[Rosa Ladeira]

I am trunking 6509 WS-SUP32-10GE-3B's link interface

Gi5/3                           connected    trunk      a-full a-1000 10/100/1000BaseT

with nexus 7000 (N7K-M148GT-11) interface ethernet 2/48

Eth2/48       *** Trunk com 6509 connected trunk     full    1000    10/100/1000

By now, NX7000 is working as a switch.

I have configured 2 NX2000 as interfaces of NX7000.

Each NX2000 has a host on port 1/1. Each host is in a different vlan.

As 6509 is, by now, routing I must set a default gateway to NX7000 even though hosts can't exchange info.

Question: how can I set a default gateway to NX7000 ?

Thanks

Rosa

[Rosa Ladeira]

OK, thanks once again.

I need to overview all configuration in order to understand what is going on.

I am working on wrong concepts.

Regards,

Rpsa

[Rosa Ladeira]

Smale# ping 147.65.2.200 vrf management

PING 147.65.2.200 (147.65.2.200): 56 data bytes

ping: sendto 147.65.2.200 64 chars, No route to host

Request 0 timed out

ping: sendto 147.65.2.200 64 chars, No route to host

Request 1 timed out

ping: sendto 147.65.2.200 64 chars, No route to host

Request 2 timed out

ping: sendto 147.65.2.200 64 chars, No route to host

^C

--- 147.65.2.200 ping statistics ---

4 packets transmitted, 0 packets received, 100.00% packet loss

Smale# ping 147.65.14.100 vrf management

PING 147.65.14.100 (147.65.14.100): 56 data bytes

ping: sendto 147.65.14.100 64 chars, No route to host

Request 0 timed out

ping: sendto 147.65.14.100 64 chars, No route to host

Request 1 timed out

ping: sendto 147.65.14.100 64 chars, No route to host

Request 2 timed out

ping: sendto 147.65.14.100 64 chars, No route to host

Request 3 timed out

ping: sendto 147.65.14.100 64 chars, No route to host