cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

107
Views
0
Helpful
2
Replies
Beginner

NX (programmable) & yum telemetry

Struggling to find/install/activate telemetry on NX.

    "http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x_chapter_011000.html#id_39852"

 says I need to find a rpm for it but I'm having no luck.

Anyone had success with this?

    NX9K-2(config)# feature tele ?
                    ^
    % Invalid parameter detected at '^' marker.
    NX9K-2(config)# feature bash-shell
    NX9K-2(config)#
    NX9K-2(config)# end
    NX9K-2# run bash
    bash-4.2$
    bash-4.2$ ls /rpms
    bfd-2.0.0-7.0.3.I4.5.lib32_n9000.rpm    lacp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm      rip-2.0.0-7.0.3.I4.5.lib32_n9000.rpm
    bgp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm    lldp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm      snmp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm
    eigrp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm  ntp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm       svi-2.0.0-7.0.3.I4.5.lib32_n9000.rpm
    eth-2.0.0-7.0.3.I4.5.lib32_n9000.rpm    nxos-ssh-2.0.0-7.0.3.I4.5.lib32_n9000.rpm  tacacs-2.0.0-7.0.3.I4.5.lib32_n9000.rpm
    fcoe-2.0.0-7.0.3.I4.4.lib32_n9000.rpm   ospf-2.0.0-7.0.3.I4.5.lib32_n9000.rpm      vtp-2.0.0-7.0.3.I4.5.lib32_n9000.rpm
    isis-2.0.0-7.0.3.I4.5.lib32_n9000.rpm   repodata
    bash-4.2$

I was able to locate `/rpms` in bash mode so far.

Everyone's tags (1)
2 REPLIES 2
Beginner

The switch is running  7.0(3

The switch is running  7.0(3)I5(1) or newer?

Highlighted
Beginner

7.3.1.D1.1.1

(7.3.1.D1.1.1) any clue on how to retrieve RPM(s) for nexus would be great!

Thanks.

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards