NX7K EIGRP (distribute list)

[mscapellato]

Hi all

I need a support to configure an EIGRP distribute list on a Nexus 7000 running 5.1(3) version

I would like distribute all subents 192.168.0.0/16 except 192.168.101.0/24

I tried to configure the following prefix-list and everything runs well:

ip prefix-list DL-EIGRP seq 10 deny 192.168.101.0/24
ip prefix-list DL-EIGRP seq 20 permit 192.168.0.0/16 le 32

interface Vlan100
  ip distribute-list eigrp 10 prefix-list DL-EIGRP out

instead if I configure a distribute list using route-map and access-list, I cannot stop the 192.168.101.0/24 distribution

ip access-list DL-EIGRP
        10 deny ip any 192.168.101.0/24

        20 permit ip any 192.168.0.0/16

route-map DL-EIGRP permit 10
  match ip address DL-EIGRP

interface Vlan100
  ip distribute-list eigrp 10 route-map DL-EIGRP out

someone could explain me why?

thank you in advance

Marco

[mscapellato]

Hi all,

I activate the following debug:

     debug ip eigrp route-map

and this is the result:

2011 Apr 13 12:09:05.964974 eigrp: librpm 10 [4456] EVAL context->flag 0x0000005b
2011 Apr 13 12:09:05.964984 eigrp: librpm 10 [4456] Policy eval. returning action handle 0x00000000
2011 Apr 13 12:09:05.964995 eigrp: librpm 10 [4456] ========== RPM Evaluation result RPM_MATCH_ACCEPT ==========
2011 Apr 13 12:09:05.966199 eigrp: librpm 10 [4456] ========== RPM Evaluation starting for policy DL-EIGRP ==========
2011 Apr 13 12:09:05.966214 eigrp: librpm 10 [4456] **** Evaluating (rmap DL-EIGRP - seq 10 - cmd RPM_MATCH_IP_ADDR_ACL) ****
2011 Apr 13 12:09:05.966226 eigrp: librpm 10 [4456] **** Evaluation result (seq 10 - cmd RPM_MATCH_IP_ADDR_ACL):RPM_MATCH_IGNORE ***

the route-map is evaluated but ignored ... why?

Marco