Partial collection Failure for nexus 5548UP in PI 2.1

[CSCO11564866]

Hi there,

I get "Partial Collection Failure" in the inventory collection status in Prime Infrastructure for all my Nexus 5548UP (8 devices).

i have seen in the PI 2.1 release notes that a bug CSCum16230  which look like my problem has been resolved in PI 2.1 but i continue getting the "partail collection failure"

Would like to know if the bug is still exist or get any other help to solve this problem.

Regards,

Alon.

[Moises Araujo]

Hi Alon,

I have two Nexus 5548UP and checked the PI 2.1 release notes about this bug.

Yesterday I upgraded PI from 2.0 to 2.1 with no success, got same problem.

 

[dkorell]

I recently upgraded from Prime 2.1 to 2.2 and added some licenses so I added my Nexus 5548UPs and I'm getting the "feature_ethernetext_nexus" error. Anyone else upgrade to 2.2 and still having this issue?

[roman.feldmann]

hello

I have this problem as well...

we've got four N5K-C5548UP. Two with a layer 3 daughter card and two without.
interestingly we see the issue just on those boxes with the l3 daughter cards N55-D160L3-V2 installed...

Any help or ideas are highly appreciated

regards

roman

Sh inventory:

OK:
device-a# sh module
Mod Ports  Module-Type                      Model                  Status
--- -----  -------------------------------- ---------------------- ------------
1    32     O2 32X10GE/Modular Universal Pla N5K-C5548UP-SUP        active *
3    0      O2 Non L3 Daughter Card          N55-DL2                ok

Mod  Sw              Hw      World-Wide-Name(s) (WWN)
---  --------------  ------  --------------------------------------------------
1    5.1(3)N2(1c)    1.0     --
3    5.1(3)N2(1c)    1.0     --


NOT OK:
device-b# sh modu
Mod Ports  Module-Type                      Model                  Status
--- -----  -------------------------------- ---------------------- ------------
1    32     O2 32X10GE/Modular Universal Pla N5K-C5548UP-SUP        active *
3    0      O2 Daughter Card with L3 ASIC    N55-D160L3-V2          ok

Mod  Sw              Hw      World-Wide-Name(s) (WWN)
---  --------------  ------  --------------------------------------------------
1    5.1(3)N2(1c)    1.0     --
3    5.1(3)N2(1c)    1.0     --

[salprevitera]

I get the same thing on Prime version 3.1.5 and the nexus is running an old code. I think it has to do with the code running on the Nexus.

5.2(1)N1(4)

Cisco Nexus 5020 Switch