12-19-2018 08:48 AM - edited 03-08-2019 04:51 PM
Hi, I am trying to set up Policy Based Routing to enable load sharing across two internet pipes.
The current set up allows all users to browse from a Proxy using a static default route 0.0.0.0 to the internet.
Can PBR be used alongside Static Routing? I've tried to set up the necessary match commands and route map for the Source Based Routing but the traffic gets dropped. Packet Trace shows that the route lookup that takes place tries to send the traffic using the Static Route. Any ideas?
12-19-2018 09:33 AM
You ask one clear question, which is can Policy Based Routing operate alongside Static Routing? The answer to that is that yes PBR can work just fine alongside static routing. To provide assistance beyond that we need a better understanding of the topology of your network, what are you wanting to policy route, and what is in the configuration.
HTH
Rick
12-20-2018 02:53 AM
12-20-2018 09:23 AM
Thanks for the information. I have two points about what you have shared with us.
- the route map appears to be on the outbound interface. the route map should be applied on the inbound interface.
- you are using set default ip next-hop. I wonder why setting default rather than just setting next-hop.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide