Port Numbering for 4500-X with 8 ports uplink module

[BenBen]

Hi,

Anybody has 4500-X with 8 ports uplink module (C4KX-NM-8SFP+)? Could you let me know how the port in the uplink module is numbered?

Is it T2/1 to T2/8? I have 16 ports 4500-x with no 8 ports uplink module.

Thanks.

[InayathUlla Sharieff]

I dont have the module right now with  me...but I believe it would be from T2/1-8 .

[BenBen]

Thank you InayathUlla, it is a correct guess. Please see rake's comment.

[rakeshvelagala · Accepted solution]

Below switch is in VSS, so you can ignore the 1/

Yes it shows 2/x 

Chassis Type : WS-C4500X-32

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 1    32  4500X-32 10GE (SFP+)                                                  
 2     8  10GE SFP+                

Te1/2/1                      notconnect   1            full   auto No XCVR
Te1/2/2                      notconnect   1            full   auto No XCVR
Te1/2/3                      notconnect   1            full   auto No XCVR
Te1/2/4                      notconnect   1            full   auto No XCVR
Te1/2/5                      notconnect   1            full   auto No XCVR
Te1/2/6                      notconnect   1            full   auto No XCVR
Te1/2/7                      notconnect   1            full   auto No XCVR
Te1/2/8                      notconnect   1            full   auto No XCVR

[BenBen]

Thank you Rake. It is very helpful. We actually are also in a vss setup.

-Frank