Port Security on 2350 Switch

[jojiv]

Hi Experts

I am Using Cisco 2350 Switches in my LAN. I want to enable port security on Cisco 2350 Switch. But port security commands are not supported under interface configuration. Cisco 2350 switch having only LAN Lite image. I wanted to know whether we can enable port security on 2350 switches.

If not supported , what is the solution to enable port security, as it is a mandatory requirement. Also wanted to know cisco road map plan to enable port security on 2350 switch

Regards

JMV

[Reza Sharifi]

Hi JMV,

It is supported in your version of code you are running:

from the command reference guide:

spanning-tree portfast global config

spanning-tree portfast interface

Here is the reference guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2350/software/12.2_46_ey/command/reference/2350cr.pdf

HTH

Reza

[jojiv]

Hi Reza,

My requirement is to use switchport port-security commands. I have to restrict the systems connecting to switch ports based on system MAC address. At I present I would like to restrict one MAC per port. If any violation happens, port has to be shutdown automatically.

I am doubt on the commands provided by you meet my requirement.

Expecting your advice

Regards

JMV