Hello everybody,
do anybody knows, if the feature "port-security" available on nexus 3000?
It's about a nexus 3172TQ with NX OS 6.0(2)U4(2) and with port-security enabled. Port security configured on some interfaces and server connected to the interfaces. Communication with the server is working fine, but checking the port-security statistics I cannot see any mac addresses or counts on interfaces with port-security configured:
nexus3k# show port-security
Total Secured Mac Addresses in System (excluding one mac per port) : 0
Max Addresses limit in System (excluding one mac per port) : 8192
----------------------------------------------------------------------------
Secure Port MaxSecureAddr CurrentAddr SecurityViolation Security Action
(Count) (Count) (Count)
----------------------------------------------------------------------------
Ethernet1/1 5 0 0 Restrict
Ethernet1/3 5 0 0 Restrict
Ethernet1/4 5 0 0 Restrict
Ethernet1/6 5 0 0 Restrict
Ethernet1/8 5 0 0 Restrict
Ethernet1/18 5 0 0 Restrict
============================================================================
Bei "show port-security address" gibt es auch keine Ausgabe:
nexus3k# show port-security address
nexus3k#
Command show mac address-table does not show me any mac addresses on port security imterfaces too.
I also cannot find any config guides for port-security on nexus 3000.
Do anybody have expiriences with it?
Thank you
Sergej
