cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
266
Views
0
Helpful
1
Replies

PPP Stateful Switchover keepalive trouble

Vadim Semenov
Level 1
Level 1

Hi All,

i want to configure fast reconnect PPTP session from 3rd patry router to two ASR 1002, but PPTP session exceed 50sec. I've setuped SSO, but recently i know what PPTP protocol is not SSO-aware and thy most strangest is "PPP and MLP are not configurable and run by default on networking devices configured with SSO." http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ha/configuration/xe-3s/ha-xe-3s-book/ha-config-stateful-switchover.html#GUID-FBED64BD-2A3A-46DE-8818-7CAD7161BBF3

So, i couldn't dicrease 50-sec timeout?? Help please

ASR1#

redundancy inter-device

 scheme standby HA

!

ipc zone default

 association 1

  no shutdown

  protocol sctp

   local-port 10001

    local-ip 192.168.1.2

    retransmit-timeout 300 10000

   remote-port 10001

    remote-ip 192.168.1.3

vpdn enable
!
vpdn-group 1
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 pptp tunnel echo 5

 

ASR2#

redundancy inter-device

 scheme standby HA

!

ipc zone default

 association 1

  no shutdown

  protocol sctp

   local-port 10001

    local-ip 192.168.1.3

    retransmit-timeout 300 10000

   remote-port 10001

    remote-ip 192.168.1.2

vpdn-group 1
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 pptp tunnel echo 5

1 Reply 1

Vadim Semenov
Level 1
Level 1

and the second question is why so restrictions about default timers?

Review Cisco Networking for a $25 gift card