06-27-2013 02:49 PM - edited 03-07-2019 02:07 PM
Can any one tell me how to config PVLAN in GNS3 switches like 3700?
I tried everything but some commands didnt work!!
Thanks,
Solved! Go to Solution.
06-27-2013 07:25 PM
Duplicate post.
Hi Anand,
Sorry you cannot achieve this on GNS3. The PVLAN feature cannot be fully accomplished on the GNS3 as there is quite limited Switching concepts which can be achieved over there.
Here is list of missing features compared to catalyst switch:http://forum.gns3.net/topic229.html
Also the same has been recorded on the GNS site:
FOR THIS LAB YOU NEED REAL HARDWARE. YOU CAN'T USE SWITCHES IN GNS3!
http://gns3vault.com/Switching/private-vlan.html
Hope this answered your query.
Regards
Inayath
*Please rate this post if usefull and mark the thread as Answered if you dont have any further query.
06-27-2013 07:25 PM
Duplicate post.
Hi Anand,
Sorry you cannot achieve this on GNS3. The PVLAN feature cannot be fully accomplished on the GNS3 as there is quite limited Switching concepts which can be achieved over there.
Here is list of missing features compared to catalyst switch:http://forum.gns3.net/topic229.html
Also the same has been recorded on the GNS site:
FOR THIS LAB YOU NEED REAL HARDWARE. YOU CAN'T USE SWITCHES IN GNS3!
http://gns3vault.com/Switching/private-vlan.html
Hope this answered your query.
Regards
Inayath
*Please rate this post if usefull and mark the thread as Answered if you dont have any further query.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide