04-10-2009 06:49 PM - edited 03-06-2019 05:07 AM
Hi
I'm in desprete need to learn how to configure an MDS 9000 switch, if you can provide a doc that I can read, or some simple instructions after you log in, I would appreciate it very much.
I don't see any docs that can help me?
Please respond to my E-mail if possible.
Jorge
04-11-2009 03:19 AM
Hello Jorge,
use the following
http://cisco.com/en/US/docs/storage/san_switches/mds9000/sw/san-os/quick/guide/quick_cg.html
Hope to help
Giuseppe
04-11-2009 01:10 PM
Thanks Giuseppe, is very much appreciated. The only problem I have is that in order to use the CLI commands you need to be more familiar and know what you are doing.
I would be more confortable using the the GUI interface.
Is there a doc that shows or gives this info that you can share, please?
I know the Brocade switch very well, by using the GUI interface and not the telnet interface, (this is where you use the CLI commands).
Jorge
04-12-2009 09:24 AM
Hello Jorge,
the following link may help it is about Fabric Manager
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/fm/quick/guide/fm.html
Hope to help
Giuseppe
04-12-2009 01:21 PM
Thanks again, hope this will help, by using the Fabric Manager.
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide