Hi guys
I am trying to configure authentication login with radius server. The configuration is working fine with 2960, 3860, but something wrong with my 4507
- From 2960, 3860: user privilege 15 and privilege 1 are authenticated right, i can see everything by "debug radius; terminal monitor"
- From 4507: user privilege 15 is authenticated fine, but user privilege 1 is not authenticated, and i can not see log with these commands "debug radius; terminal monitor" even user is authenticated or not.
Radius configuration (same configuration with 2960 and 3860)
username admin privilege 15 password abc123
aaa new-model
aaa group server radius RADIUS-SERVER
server name RADIUS-68
server name RADIUS-86
aaa authentication login default local group RADIUS-SERVER
aaa authorization exec default local group RADIUS-SERVER
radius server RADIUS-68
address ipv4 x.x.x.x auth-port 1812 acct-port 1646
key xxxxxx
radius server RADIUS-86
address ipv4 x.x.x.x auth-port 1812 acct-port 1646
key xxxxxx
privilege configure all level 1 interface
privilege exec level 1 show running-config
privilege exec level 1 show configuration
privilege exec level 1 show
ip radius source-interface Vlan1
