Hi Folks,
I need a little help, verification. We have some 6509's with MSFC's running a bunch on virtual interfaces and we want to limit the bandwidth on one vlan/interface. Here is my interface config:
interface Vlan110
description slow lane
ip address 10.1.110.2 255.255.255.0
no ip redirects
no ip unreachables
rate-limit input 8000 1500 2000 conform-action transmit exceed-action drop
rate-limit output 8000 1500 2000 conform-action transmit exceed-action drop
standby 110 ip 10.1.110.1
standby 110 priority 220
standby 110 preempt
When I test file downloads on this vlan I am still getting around 200 KB/s. Yet I was expecting way less with the above config. So I checked to see if
the interface is showing the limits:
hono-rhp-hb-gw01#sho interfaces vlan 110 rate-limit
Vlan110
Input
matches: all traffic
params: 8000 bps, 1500 limit, 2000 extended limit
conformed 0 packets, 0 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: drop
last packet: 15253688ms ago, current burst: 0 bytes
last cleared 00:31:58 ago, conformed 0 bps, exceeded 0 bps
Output
matches: all traffic
params: 8000 bps, 1500 limit, 2000 extended limit
conformed 1069 packets, 126834 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: drop
last packet: 1060ms ago, current burst: 0 bytes
last cleared 00:31:58 ago, conformed 0 bps, exceeded 0 bps
Yet I can download 200 meg files in less than 15 minutes...?