02-03-2017 06:40 AM - edited 03-08-2019 09:10 AM
Hi all,
Is it normal that "Readonly ROMMON initialized" message shows when Cisco 1921 is booting?
When I type "sh ver" it shows at the end of output that config-register is set to 0x2102.
Thanks in advance!
Solved! Go to Solution.
02-03-2017 09:42 PM
Is it normal that "Readonly ROMMON initialized" message shows when Cisco 1921 is booting?
This is very normal.
02-03-2017 09:58 PM
That is normal during the boot sequence, if you enter to rommon mode you will see something like:
rommon 1 >
rommon 2 >
This link could be useful: http://www.smartpctricks.com/2015/01/cisco-router-boot-process-steps.html
:-)
02-03-2017 08:29 AM
HI!
can you pls share some more information like screen short .
thank you
CRaju
02-03-2017 10:28 AM
sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.4(3)M3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 05-Jun-15 12:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
R1 uptime is 4 hours, 0 minutes
System returned to ROM by reload at 14:07:46 UTC Fri Feb 3 2017
System image file is "usbflash0:c1900-universalk9-mz.SPA.154-3.M3.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO1921/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250864K bytes of USB Flash usbflash0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*1 CISCO1921/K9
Technology Package License Information for Module:'c1900'
------------------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data None None None
NtwkEss None None None
Configuration register is 0x2102
dir flash:
flash:c1900-universalk9-mz.SPA.154-3.M3.bin flash:ccpexp
flash:cpconfig-19xx.cfg flash:home.shtml
dir nvram:
Directory of nvram:/
253 -rw- 1223 <no date> startup-config
254 ---- 5 <no date> private-config
255 -rw- 1223 <no date> underlying-config
1 -rw- 2945 <no date> cwmp_inventory
4 ---- 396 <no date> persistent-data
5 -rw- 17 <no date> ecfm_ieee_mib
6 -rw- 559 <no date> IOS-Self-Sig#1.cer
02-03-2017 09:58 PM
That is normal during the boot sequence, if you enter to rommon mode you will see something like:
rommon 1 >
rommon 2 >
This link could be useful: http://www.smartpctricks.com/2015/01/cisco-router-boot-process-steps.html
:-)
02-03-2017 09:42 PM
Is it normal that "Readonly ROMMON initialized" message shows when Cisco 1921 is booting?
This is very normal.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide