08-21-2008 05:11 AM - edited 03-06-2019 12:56 AM
I tried searching the archives and google but couldn't find what this means anyone point me in the right direction? Thanks. Basically, the status light on the 4506 is red and no one connected to that switch has connectivity, i tried consoling in but it seems frozen even after reboot, does this mean the sup is gone?
Thanks
Solved! Go to Solution.
08-21-2008 05:18 AM
Hi,
Look at Using LEDs to Identify Startup Problems
If the problem persists Contacting the Cisco Technical Assistance Center
I hope this helps.
Best regards.
Massimiliano.
08-21-2008 05:18 AM
Yes !!!...Mostly SUP is gone, if you are not getting the console access also....
Try removing the SUP & resinserting again and see if it comes online.
HTH..
08-21-2008 05:18 AM
Hi,
Look at Using LEDs to Identify Startup Problems
If the problem persists Contacting the Cisco Technical Assistance Center
I hope this helps.
Best regards.
Massimiliano.
08-21-2008 05:18 AM
Vinh,
It looks like you will need to RMA the supervisor in your switch. For your reference here is a guide to what the LED's mean.
HTH,
Mark
08-21-2008 05:19 AM
thanks a lot guys, it's the info i'm looking for!
Vin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide