07-05-2013 09:48 AM - edited 03-07-2019 02:15 PM
I have been looking for about an hour (my google-fu is obviously not as strong as others) for some form of documentation that would provide a suggested period of time before a reload is suggested just for routine maintenance and upkeep of the equipment. So my question is three fold: Does such a document exist? If it doesn't, does Cisco actually recommend reloading switches as part of a routine maintenance schedule? If they do, what is that timeframe? Any information is truly appreciated!!!
Respectfully,
Aaron
07-05-2013 10:04 AM
Aaron,
I could say that we dont have anywere recorded on data sheet that you have to reboot the device after such period of time.
But I dont want to upset and let you go with the above answer. Here is what I can say with my experience:
1-
I have seen many customer scheduling the MW to perform the reload of there boxes once a year.... just to make sure that everything is fine(I.e all hardware comes up properly when they do the reload activity.)
2-
Similar discussion was held:--
https://supportforums.cisco.com/thread/2100235
https://supportforums.cisco.com/thread/2122497
HTH
Regards
Inayath
********Plz rate if this information is helpfull******************
07-05-2013 10:16 AM
Thanks for the information!
07-05-2013 04:04 PM
It doesn't matter how "old" or "new" your IOS in your appliances are, I always find an "excuse" to reboot everything network gear I have every year.
My core equipment gets an IOS (bootstrap too) upgrade.
My access switch gets an IOS upgrade everytime I see an IOS version I like to run.
I can't say for everyone, but some people I use to work with, the word "regular" and the phrase "IOS upgrade" should never be mentioned. The reason why some people are very afraid of doing software maintenance is because:
1. They are afraid that a simple IOS upgrade may cause a component or appliance to fail;
2. The trouble caused when downstream clients designed poorly; and
3. Not a lot of people know how to do an IOS upgrade.
NOTE: I did a few "tripped over the power cable".
07-05-2013 05:32 PM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
I've worked with multiple Cisco devices that have run (in production) up to 8 years without a reload (not that I'm recommending it).
07-05-2013 08:03 PM
Hi Aaron,
Hope we all have answered your query. Could you please do us a favour to mark the thread as answered if you dont have any further queries so that we dont leave questions as unanswered.
Kindly rate the usefull posts though :-)
Regards
Inayath
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide