Good morning,
We have an Ethernet ring using an IE3010 and 4 x IE3000 switches configured with REP.
All the links are microwave radio connections.
Two of the switches lose connectivity and report the following error:
"005563: May 10 00:37:20.898: %REP-4-LINKSTATUS: GigabitEthernet1/2 (segment 1) is non-operational due to neighbor not responding
005564: May 10 00:37:24.379: %REP-4-LINKSTATUS: GigabitEthernet1/2 (segment 1) is operational"
The RF links seems to be stable.
I am wondering if anyone has experience with REP on microwave links or know what can be causing this flapping?
Thank you
Pieter
