cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
911
Views
0
Helpful
3
Replies

Replacing Distribution Switch

What is the important configuration need to backup or need to be copy in the distribution switch? because we have plan to replace the DSW but in still in the same model 3750.

3 Accepted Solutions

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame
Copy the entire lot.

View solution in original post

johnlloyd_13
Level 9
Level 9

hi,

are they stacked?

 

you'll basically need to migrate the config from the show run output, i.e. VTP, VLANs, STP, L3 and L2 port config, L2/L3 etherchannel (if used), L2 or L3 default GW.

View solution in original post

Currently only DSW is working because the other one is faulty , so now we need to replace stack DSW. Please advise

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame
Copy the entire lot.

johnlloyd_13
Level 9
Level 9

hi,

are they stacked?

 

you'll basically need to migrate the config from the show run output, i.e. VTP, VLANs, STP, L3 and L2 port config, L2/L3 etherchannel (if used), L2 or L3 default GW.

Currently only DSW is working because the other one is faulty , so now we need to replace stack DSW. Please advise
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: