resetting switch

[carl_townshend]

If I need to reset my switch do I just do a erase startup-config and delete flash:vlan.dat ?

thanks

[Nicholas Vigil]

Yes, the erase startup-config will delete the stored configuration file and the delete flash:vlan.dat erases the vlan database. After issuing these commands you have to reboot the switch without saving the current configuration and the switch should reboot with a blank configuration.

[sarancheck]

you can also do hard resetting which will erase all ur config.

1.Hold ur button in setup button

2. Remove the plug /switch off & on again

3. hold the button till it comes back (LED glow)

now it will load with factory config