05-09-2006 07:10 AM - edited 03-05-2019 11:53 AM
If I need to reset my switch do I just do a erase startup-config and delete flash:vlan.dat ?
thanks
05-09-2006 07:28 AM
Yes, the erase startup-config will delete the stored configuration file and the delete flash:vlan.dat erases the vlan database. After issuing these commands you have to reboot the switch without saving the current configuration and the switch should reboot with a blank configuration.
05-16-2006 05:21 AM
you can also do hard resetting which will erase all ur config.
1.Hold ur button in setup button
2. Remove the plug /switch off & on again
3. hold the button till it comes back (LED glow)
now it will load with factory config
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide