03-16-2017 12:04 PM - edited 03-08-2019 09:47 AM
Hi,
Attached is the topology of network I have created. On R4 when I check the BGP table, it shows RIB failure. I tried to fix it but unable to find the issue. Can Anyone help. Thanks in advance.
Outputs:
on R4
RTR4#sh ip bgp
BGP table version is 2, local router ID is 4.4.4.4
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
r> 5.5.5.5/32 5.5.5.5 0 0 6500 i
RTR4#
============================
On R5:
ISP_RTR#sh ip bgp
BGP table version is 2, local router ID is 5.5.5.5
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 5.5.5.5
=========================================================
03-16-2017 12:32 PM
Try redistributing connected interfaces.
03-16-2017 12:35 PM
Hi,
Have a look at this post. Jon's answer is marked as correct and I am sure it is.
https://supportforums.cisco.com/discussion/10789071/bgp-rib-failurebest-steps-eliminate-it
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide