Seeing EOBC error on WS-X6248-RJ-45

[Richard Ortiz]

I have a remote site customer that found the following messages in show log. I feel that the problem is most likely the module in slot

9, which is a WS-X6248-RJ-45. I'm just not completely sure. The command to power up the module was done. The system is up, operational, and currently there are no issues. However, we would like to know why module 9 went down.

3/7/2010,17:15:54: EobDetermineChannelMisbehavior:EOBC on module 9 is faulty. Module powered down!

Thanks,

Richard

[Ganesh Hariharan · Accepted solution]

I have a remote site customer
that found the following messages in show log. I feel that the problem
is most likely the module in slot
9, which is a WS-X6248-RJ-45.
I'm just not completely sure. The command to power up the module was
done. The system is up, operational, and currently there are no issues.
However, we would like to know why module 9 went down.
3/7/2010,17:15:54: EobDetermineChannelMisbehavior:EOBC on module 9 is faulty. Module powered down!
Thanks,
Richard

Hi Richard,

"EOBC" means "Ethernet Out-of-Band Channel".It provides the function of Keep-Alive-Polling by regularly SCP(Serial Control Protocol)-Ping between SUP and interface modules.Just try pull out the card and insert the card and see the error is coming or not.If yes i suspect the problem with the card.

Hope to Help !!

Ganesh.H

[Leo Laohoo · Accepted solution]

Looks like it's RMA time for the card.  What's the result if you do "sh modules"?

[Richard Ortiz]

Thanks for the feedback. We've decided to replace the module.