Separation VTP domain two buildings
Hello Cisco specialists,
VTP is a topic for itself and in my opinion with caution to enjoy!
I have a VTP domain in two buildings this I would like to separate.
At the moment, there is a VTP domain for two buildings.
There are six VTP servers in this VTP domain.
Two VTP servers in building A.
Four in building B.
I would like to separate these two buildings into two separate domains.
Later, all devices in building B should be transparent as VTP.
How can I clean this up without causing problems?
I have read that I in transparent mode all vlan must manually enter again. Is this really true.
If the vlan.dat in transparent mode is considered, if not I would delete them all in building B. In Building B, there are nine switches.
I think
1. Change domain in property B change to all Switches
2. Enter Vlans manuel
3.VTP to transparent mode.
4. Delete unnecessary vlans.
I have to thank